Atmosphere sintering furnace
Application：Application: Atmosphere sintering furnace is used mainly for production of silicon carbide, ceramic, hard alloy, powder metallurgy, tungsten, molybdenum, aluminum, nickel and cobalt. Permanent magnetic, vacuum and atmosphere sintering of Smco5, Sm2co17, ferro-aluminum boron, titanium alloy. Electric furnace may be installed for single set of power depending on the sintering process time requirement and a furnace may be energized individually. Temperature rise and drop with power-off in continuous operation.
Classification:
ATMOSPHERE SINTERING FURNACE
Key words:
SINTERING
Product Description
●Common temperature: 2400 C
●High temperature zone volume: 200-2000 mm * 300-4000 mm; or square.
●Heating Method: Induction Heating Resistance Heating
●Work gas in furnace: nitrogen and argon
●Temperature uniformity: <10 ~C
|
Product Model Specification |
JR-ZKSJ-40X40X120 |
JR-ZKSJ-50X50X140 |
JR-ZKSJ-55X55X160 |
JR-ZKSJ-80X80X300 |
|
Volume(L) |
192 |
350 |
484 |
1920 |
|
Rated temperature(℃) |
2400 |
2400 |
2400 |
2400 |
|
Limit temperature(℃) |
2450 |
2450 |
2450 |
2450 |
|
Effective heating zone(mm) |
400X400X1200 |
500X500X1400 |
550X550X1600 |
800X800X3000 |
|
Power(KW) |
150 |
250 |
350 |
800 |
|
Frequency(HZ) |
1500 |
1000 |
1000 |
1000 |
|
Temperature control |
Shimaden thermostat is used. |
|||
|
Heating mode |
Induction heating,Resistance heating |
|||
|
Vacuum system |
Rotary vane vacuum pump or sliding valve vacuum pump + Roots vacuum pump |
|||
|
Sintering Environment |
Gas like N2 and Ar2. |
|||
|
Rated power supply voltage(V) |
380 |
|||
|
Configure transformer according to design(V) |
Configuration of transformer in front of furnace according to design |
|||
|
Vacuum limit(pa) |
6X10ˉ²（Vacuum cold state） |
|||
Previous Page
Next Page
Previous Page
Next Page